5 People You Oughta Know In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. You should take the time to make sure that your windows are in good working order.


For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If window repairs near me planning attempt to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from entering your property until a professional comes out to repair the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the distance between the door and the window is substantial, you may want to use security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll need open the window to access the frame. After that, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles could also become loose. This is typically caused by screws that have become undone over time, but it can be due to the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close the window and perform an experiment to ensure that it fits. The corners of the sash need to align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue the old caulking may require removal before a new layer can be applied. When it is time to uPVC repair, you must avoid 'over-caulking'. This will make your window more difficult to clean and reduce its energy efficiency.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be hinges that are at fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is very easy to change a window hinge, but it's easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you advice.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges, also due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window, can be misaligned. Again, it is possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to recognize that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional immediately.

Edit
Pub: 03 Feb 2024 18:44 UTC
Views: 9