Why Is Ghost Immobiliser Install So Famous

Autowatch Ghost Immobiliser Installation

The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's subtle, doesn't have LED indications or key fobs and is concealed in the vehicle's wiring.

It also permits the user to turn off the system temporarily by using Transport Mode in the event of renting out their vehicle. This guide will take you through the installation of a Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against key cloning, hacking and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a pin code you select. It is undetectable by thieves using diagnostic scanners or other advanced methods. It cannot be disabled with circuit cuts.

The system is easy to use, but professional installation is advised to ensure a perfect connection with the ECU of your vehicle. Installers certified by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.


To avoid the accidental deployment of airbags or short circuits, the installer must first remove your battery. Once this is done the installer is able to safely begin work. Hand tools are the most basic to be used for precise connections. A multimeter is a great tool to test electrical values. Insulation tape and cable tie are essential to protect connections and keep wiring tidy. The Ghost Immobiliser user manual will provide specific instructions specifically tailored to your specific model.

During the installation process, it's essential to choose the right grounding location that is free of any paint or debris. The installer should be sure that the immobiliser's H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. These wires can be plugged in or soldered depending on the model. Using a quality connector is recommended to ensure a sturdy and secure connection.

Transport Mode can be turned on by the customer once the installation is complete. This allows valet parking or mechanics to use the vehicle, without knowing the pin code. To do this, the customer must press the button for service on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by showing five indicators.

The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's an excellent option for anyone who regularly rents their vehicle on platforms like Turo. Having an immobiliser can also reduce insurance premiums, since it greatly reduces the chance of theft.

Getting Started

If you are looking for a solution that will secure your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. The device prevents your vehicle from starting if someone steals or copies your key. This is due to its advanced technology, which is designed to prevent the engine from running without the correct PIN code is entered.

The device is connected to the vehicle's bus system CAN and allows direct communication with the ECU. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence that only you know, making it impossible for others to start your car. This is the most secure security system that protects your car's pride and joy, keeping its value intact in the event that you decide to sell it in the future.

Installing a Ghost immobiliser is easy however, you must follow the instructions to avoid electrical issues and malfunctions of the system. You must first locate a power supply of 12V and a solid grounding on the chassis of your car. After that, you are able to begin to connect the wires that will be used to activate the immobiliser. Use high-quality connectors, and soldering techniques for a secure connection. Connect the connections with heat shrink tubing, insulation tape or other materials to prevent short circuits of electricity.

Once the wires are connected, you can reconnect the battery and turn on the engine to test the function of the immobiliser. After you've confirmed that everything is working properly then you can put the immobiliser in a secure location in the vehicle. Be sure to cover it properly to stop a thief from tampering with it.

The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car thieves. It offers superior protection against key cloning, hacking, and relay attacks, and can't be disabled without knowing the code. The device is simple to use, and it can be set up to an option for a service valet so that your vehicle will not be activated when you take it to an MOT or for servicing.

Wiring

The Ghost Immobiliser is a cutting-edge security system that is designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to its CAN bus. Ghost Immobiliser doesn't interfere with your vehicle's factory settings, unlike other aftermarket systems that require the removal of circuit elements.

It's also undetectable to thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals but instead uses CAN data for communication with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.

Enter the sequence to disarm (either two or one buttons) and then switch on the ignition of your vehicle to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you have entered the correct code. Once you've verified this, you're able to start your car and drive away in peace.

Once installed, Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. If you ever have to hand over your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.

You'll need a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Be sure that they are well-insulated and safe to touch. It is also recommended to use cable tie to secure and bundle the wires, since this reduces the risk of theft by thieves. Make sure you verify the position of these points to avoid making mistakes, and mark them with an adhesive or label. It's also a good idea to examine every connection for signs of wear and tear. Connections that are loose can cause problems with the system, so be certain that they are securely in place and securely insulated. ghost 11 immobiliser forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit functions properly and that all connections and insulation are safe. Be sure to fix any issues immediately.

Testing

The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your car's ECU to stop unauthorized motor starting. Its innovative technology protects your vehicle from key cloning and hacking and other typical tactics thieves employ to steal cars. The Ghost is also able to work in conjunction with other alarm and tracking systems to offer the ultimate vehicle protection. The Ghost's unparalleled features and secluded design make it a popular choice for car enthusiasts and security-conscious drivers too.

It is important to follow the procedures for installation to ensure the complete integration of the Ghost Immobiliser. Refer to the wiring diagram for the vehicle to assist you in locating and connecting the wires. You'll need to determine the grounding and power sources. Once you've found them, you will need to mark the points so that they are easy to locate during installation. It's important to use high-quality materials and tools. Basic hand tools will help you make precise connections. A multimeter can verify electrical values, and also ensure security. Insulation tape and cable ties will keep the connections tidy and neat. A Ghost-specific user's manual is also available.

Before proceeding with the installation, it's important to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser functions as intended and will stop vehicle starts that are not authorized. It's recommended to perform this routinely as part of your regular inspections of the vehicle to ensure the system is always functioning correctly.

After the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will keep your car and its contents safe from would-be thieves, ensuring that nobody can escape with your car without the proper PIN code. The Ghost can be paired with an approved Thatcham tracker, which detects attempts at theft or tampering. This allows you to locate your car if it's stolen.

The Ghost can be used on a wide range of vehicles and is compatible with the majority of major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines for the installation of our products. This assures customers as well as insurance companies and law enforcement agencies that all installations are carried out safely and properly.

Edit Report
Pub: 12 Dec 2024 03:47 UTC
Views: 5