10 Fiat Key Cover Tricks All Experts Recommend

How to Find a Fiat 500 Spare Key

Fiat's 500 is something of an iconic car since its relaunch in 2007. The company is now planning an aggressive campaign to other powertrains by launching a mild hybrid version.

The replacement of the key fob batteries on the Fiat 500 are simple and cost-effective. The Fiat main dealer will provide the key in approximately 10 days.

Diagnostics of a fault

The key fob contains an electronic chip which communicates with your Fiat's immobiliser system to ensure that only authorised cars are able to start the engine. If the transponder contained in your key fob has been damaged and damaged, it won't be in a position to connect to the immobiliser. fiat key means that your car won't start.

The good news is that it's possible to repair a broken key fob, provided the chip is not physically damaged. A professional locksmith can help in this regard, and will employ the latest technology from dealers to repair it quickly and efficiently.

By using an OBD scanner, it is possible to determine if the fob is still communicating with the receiver module. This is a quick and easy process that can give you a first indication of the issue. If the OBD scan tool reports that communication between the receiver and transmitter modules is not occurring, it may be necessary to replace the fob's transmitter. This is an expensive option and should be left to locksmiths.

Dead Coin Battery

The most common cause of an unresponsive key fob is a dead battery. Fortunately, this is an easy fix that only takes about 15 minutes. Make sure the key fob is seen by your vehicle. Then, try pressing the "Lock" or "Unlock" button to test if it responds.

If the key fob isn't in range, it might not be responsive at all, or only intermittently. This could be an indication of a defective circuit board. It is recommended to consult the owner's guide to get instructions on how to reprogram the key fob in this instance.

You can replace the battery by removing the mechanical latch on the back of the fob (see the image below). Then, gently remove the edges of the battery holder, close to the switch. Remove the old coin cell battery. Insert a new #CR2032 3-volt battery into the fob with the "+ side" facing the rear cover and the " side" directed towards the buttons made of rubber.

Water Damage


The key fob isn't waterproof even though it has rubber seals to keep water from getting into the electronic chip. A splash of water from rain or a wash cycle is likely to be fine but submerging it fob in ocean or pool water could cause damage to it.

If the key fob is exposed to water and ceases to function it must be reset. You can follow the directions in the owner's guideline, or take it to an experienced locksmith or Fiat dealer.

A fob that is not in the range of operation may stop working. The range of the fob's range is usually about 30 feet. If they are too far from your car, it may not recognize the fob. The first step is to move closer to your car. If this isn't working, you might have to replace the key fob. You can find information on how to replace the battery in most automobiles on YouTube or by consulting the owner's manual. If your key fob appears rough and scratched, it's time to replace it.

Faulty Receiver Module

Modern Fiat models do not require an actual key to start or open the car. The cars have a remote control that sends an electronic message to the car to switch the engine on and off. A locksmith can repair the broken keyfob. You will save time and money by delegating this work to the professionals. They can also program the new key for your Fiat.

When you are getting a spare key for your Fiat vehicle, you'll have to give the locksmith some information about your car on the phone. You'll need to provide the locksmith details regarding the car, including the year it was made and the model. This is essential because the locksmith will require this information to ensure that the new key works with the locks in place.

There are not many locksmiths who can make replacement keys for Fiat automobiles. Find a locksmith with an excellent track record and experience in the field. This means you can be certain that the key will work with your car and you will not waste money.

Keys that are unpaired

If you have a key fob which has stopped functioning, the most likely reason is a dead coin battery. The key fob contains metal retaining clips that hold the button cell in place and complete the circuit in the event that they wear out or loosened, it can cause contact issues and the loss of power. Replace the battery with a new one of the same size, voltage, and specifications, or get a spare.

If the key fob was submerged in water, it's vital to dry it before re-inserting it. This can be accomplished using isopropyl or electronic cleaner. It is also recommended that you remove the battery and clean the circuit board and replace it prior to replacing.

Contacting locksmiths is the best solution if you can't find an extra. Locksmiths who are certified to reprogram Fiat transponder keys is able to do this without the need to see the original keys. This is a speedier and cheaper solution rather than waiting for the original Fiat key from Italy to arrive. A professional locksmith will have all the tools and equipment required to complete a replacement as quickly as possible.

Edit
Pub: 27 Mar 2024 00:59 UTC
Views: 65