Tutorial made by Divinium @ https://divinium.cc/

Gigabyte AMD RAID Tutorial

Step 0:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Under
Settings\IO Ports, set SATA Configuration\SATA Mode to RAID. Then save the settings and
restart your computer. (If you want to use NVMe PCIe SSDs to configure RAID, make sure to set NVMe RAID
mode to Enabled.)

Step 1:
In BIOS Setup, go to BIOS tab and set CSM Support to Disabled. Save the changes and exit BIOS Setup.

After the system reboot, enter BIOS Setup again. Then enter the Settings\RAIDXpert2 Configuration Utility
sub-menu.

Step 3:
On the RAIDXpert2 Configuration Utility screen, press <Enter> on Array Management to enter the Create
Array screen. If you cannot create an array, please press <Enter> on Delete Array first, then create your arrays.

Then, select RAID0 or Volume, we recommend Volume if available. Next, press <Enter> on Select Physical Disks to enter the Select Physical Disks screen.

Step 4:
On the Select Physical Disks screen, select the hard drives to be included in the RAID array and set them to
Enabled. Next, use the down arrow key to move to Apply Changes and press <Enter>.Then return
to the previous screen and leave the Array Size, Array Size Unit, Read Cache Policy and Write Cache Policy as is.

Step 5:
After setting the capacity, move to Create Array and press <Enter> to begin.

Raid volume created

Edit

Pub: 15 Dec 2024 22:22 UTC

Edit: 10 Mar 2025 02:02 UTC

Views: 286