Motorola Razr Plus 2024 Razr 50 Ultra Teardown & Disassembly

Welcome back to the channel! Today, we're diving deep into the Motorola Razr Plus 2024, additionally recognised in a few areas because the Razr 50 Ultra. This teardown and disassembly advisor will walk you by means of every step needed to take apart this foldable telephone and spotlight key restoration insights. If you experience content material like this, ascertain you subscribe and click on the notification bell so you are going to be notified anytime I add a new video. Also, once you desire any tools for this teardown, investigate out the links in the description beneath.

Let's get started by means of putting off the SIM tray. Taking a more in-depth inspect the SIM tray, which you can see a black rubber gasket round the outlet, which enables to shop water and dirt out. This gasket is central for protecting the mobile’s IP ranking.

Next, we need to apply warmness to either the outer display screen and the underside canopy. You can use both a hairdryer or a warmth gun to melt the adhesive beneath. I select using a hairdryer since it reduces the risk of overheating and damaging interior factors. Once the adhesive is adequately heated, use a pry software to intently pry off the outer reveal and bottom conceal.

With the screen and backside conceal eliminated, we will be able to see a Philip screw holding down the quilt over the display connector. Remove this screw to get admission to the connector. It's really worth noting that the glass camera lens covers should be would becould very well be changed by means of using warmth and prying them off, that means you don't need to disassemble the complete smartphone to substitute these covers.

Here’s a closer observe the lower back of the reveal and the vegan leather-based again canopy. You'll observe the graphite movie over the motherboard, which is used to aid expend warmness. Peel this film off to continue additional.

Eleven more Phillips screws need to be eliminated to get right of entry to the internal ingredients. After elimination these screws, disconnect the battery cable and different flex cables from the mainboard. The LED flash is placed on the quilt, and the flex Samsung phone repair cable for the telephoto lens needs to be disconnected from the mainboard as well.

The motherboard within the Razr Plus 2024 is a twin-layer layout. On one side, you could see the 50-megapixel commonplace digicam, which is the solely digicam with optical graphic stabilization (OIS). There's a secondary microphone in the proper nook, an autofocus and easy sensor on the returned, and some copper tape at the shields to reduction in warm dissipation. The SIM reader is determined on the alternative facet, which include the proximity sensor and a 32-megapixel entrance-dealing with digicam. There's also graphite film and thermal paste at the returned shields to aid move warmness.

Once the graphite movie is peeled returned, that you may see an aluminum plate on leading of the RAM, which is seated on most sensible of the processor. Here's a better observe the skinny aluminum plate and the RAM and processor meeting.

To dispose of the battery on the proper turn, there are no pull tabs to support in prying it off. Instead, you can desire to apply some isopropyl alcohol round the facets of the battery and enable it sit down for about 30 seconds to a minute. This will aid to weaken the adhesive beneath, making it easier to pry the battery out.

Here’s a inspect the first battery, that's rated at 150 milliamp hours. The telephoto camera is held in area with adhesive, so that you can exchange it, you’ll want to use heat and thoroughly pry it off. The same activity applies to the earpiece speaker found on the exact.

For the extent buttons, the flex cable is hung on with adhesive. If you need to substitute this, you are going to ought to pry off the flex cable from the frame and eradicate the rubber gasket that seals it inside the frame. The fingerprint sensor additionally has a rubber gasket securing it in position, so as to update it, you’ll desire to lower out the gasket and pull the flex cable from the frame.

There are seven Phillips screws on the bottom that desire to be got rid of subsequent. After that, disconnect the base battery cable and the relax of the flex cables. To unlock and release those flex cables, lift up the black latches.

Here's a examine the wi-fi charging coil and the NFC antenna on the underside canopy. The light gray line you spot is an antenna line.

For the lowest battery, the procedure is just like the right: follow isopropyl alcohol around the perimeters to weaken the adhesive, making it less complicated to pry the battery off. This backside battery is rated at 2950 milliamp hours. The flex cable for the folding reveal demands to be peeled off from the subboard, which may now be lifted up and removed.

Taking a examine the subboard, we see the conventional microphone found lower than a included take care of. Here’s a analyze any other facet of the subboard. The charging port has a pink rubber gasket round the hole for delivered policy cover against water and dust. This is the bottom speaker assembly, and the vibrator motor is found within the bottom nook, held on with adhesive.

For the ones worried about placing the SIM ejector software into the wrong hollow, worry no longer—the two the filters and microphones on the top and bottom are seated above the holes, so they gained’t get broken.

If you desire to update the folding reveal, as soon as the flex cable is disconnected and peeled off from the subboard, you'll warmness up the plastic border at the entrance and pry it off. Then, follow heat to the folding display screen to loosen the adhesive under and thoroughly pry it off from the body. However, I'm now not going to pry off the folding display screen during this video as a consequence of the prime danger of unfavorable it and the significance of simply by the perfect adhesive for reapplication. It’s steered to choose a replacement display that incorporates the frame pre-hooked up to simplify the activity.

These flex cables that connect the underside 1/2 of the telephone to the peak part are routed by using exclusive channels. There are covers retaining them in area such as screws and seals on higher of those screws. You'll desire to peel off the seals to dispose of the screws and covers. These black screws additionally have rubber-like seals for delivered insurance plan.

For the repairability ranking, I give the Motorola Razr Plus 2024 a 5.5 out of 10. While it’s especially common to disassemble, the lack of pull tabs for the batteries and the complexity of changing the folding screen in the reduction of its average repairability.

Now it is time to put the telephone back at the same time. Reassemble every part in opposite order, making certain all ingredients are securely reconnected. Once the whole thing is lower back in place, force at the telephone to be certain it's functioning effectively.

Before we wrap up, I wish to give a one-of-a-kind shoutout to Gadget Kings PRS. If you’re in want of reputable cellphone repair amenities, I rather endorse checking them out at Gadget Kings PRS. They’ve helped me a great deal of times and be offering terrific service. Don’t neglect to stopover at their web site for greater particulars. I desire you located this teardown and disassembly guideline valuable. If you did, please just like the video, sign up for the channel, and hit the notification bell so that you won't miss any of my future uploads. Thanks for gazing, and I'll see you in the next video!

Edit Report
Pub: 09 Dec 2024 04:17 UTC
Views: 72