20 Trailblazers Lead The Way In Ghost Immobiliser Install

Why Should You Have a Ghost Immobiliser Installed?

Autowatch Ghost is an innovative car immobiliser of the future that safeguards your vehicle from theft. It operates in a discreet manner by connecting to your vehicle's CAN data network and requires a unique, PIN code that can be changed to be entered in order for the vehicle to start.


The system is quiet, has no LED indications and is undetectable by diagnostic tools. It is also TASSA acknowledged and approved by a number of insurance companies.

No key fobs or LED indicators

Ghost immobilisers are a breakthrough in car security that can prevent thieves from entering your vehicle, regardless of whether they do manage to get inside. It connects to the onboard CAN data circuit in your vehicle and communicates in a silent manner, so that there are no radio signals or key fobs in the process, making it impossible for a thief to bypass it. It is also inaccessible to diagnostics, and does not include an LED indicator which would indicate its position. This makes it a fantastic option for expensive or rare vehicles, such as classic automobiles.

Autowatch Ghost is a small device that can be hidden in your vehicle's loom and make it nearly impossible for thieves to spot it. The device connects to the CAN system and then connects to the ECU (Engine Control Unit) to deter theft. It is extremely simple to install and can be installed in just a few minutes. It is also less intrusive than other physical security devices, like steering wheel locks.

The device uses the same technology as GPS tracking devices, however it prevents car theft by preventing the vehicle from getting started. It makes use of buttons inside your vehicle to generate a unique and reversible PIN code sequence that must be entered prior to being able to drive your car. The device can be programmed to utilize obscure buttons, such as the ones on the back of the rear demister, to make it harder for a thief to guess the PIN. This type of technology is becoming more popular, and a lot of insurance companies are now requiring it on cars equipped with a keyless entry system.

The Ghost also stops key cloning and hacking. The device is connected to the CAN bus system and uses the buttons inside your vehicle to generate a unique, changeable code that must be entered before the car will start. It cannot be defeated by adding new keys or altering the ECU. Instead, the thief will require a special tool to get around the immobiliser.

The ghost immobiliser is purchased at a very low cost and is coupled with GPS tracking to ensure the security of your vehicle. It's an excellent option for older vehicles and could help you save money on insurance premiums. Contact Trackershop for a quote on ghost immobiliser. We'll add the installation into the cost, so you will be able to rest assured regarding the security of your vehicle.

It is TASSA Approved

Immobilisers are the best method to protect your vehicle. It stops a vehicle from starting unless the correct PIN code is entered and also disables other features such as the starter motor or fuel pump. motor. Having an immobiliser professionally installed is crucial. Installers should be TASSA-approved as this will ensure that the product is safe to use and operates correctly. The process involves verifying the credentials of the installer. ghost installations includes an investigation into the criminal background of the installer and an identity check.

The Ghost immobiliser is the most recent solution to prevent thieves from taking your vehicle. It connects directly to the CAN data network of your vehicle and doesn't require additional fobs or alarm systems. The system operates silently and is not able to be identified by car trackers. It makes use of the buttons on your steering wheel, door panels and the centre console to generate a unique PIN sequence. The correct sequence has to be entered to start your vehicle, which makes it incredibly difficult for thieves to hack.

This revolutionary immobiliser has been approved by TASSA and is available for installation at Trackershop. They are specialists in the installation of this device. It also offers other security products, such as remote starters and a tracking device that prevents theft. The company's team of technicians is completely mobile, and they can install the device at your workplace or at your home.

It is crucial to safeguard your vehicle, as more and more vehicles are being stolen with keys from the owners. Modern cars that are keyless are especially vulnerable to theft, since cloning equipment & door lock pick sets are readily available on the web. Autowatch Ghost is a fantastic method to protect yourself from this since it is not able to be detected by thieves and can't even be detected by vehicle trackers.

The Ghost II CAN immobiliser is completely hidden, and is unable to be tampered with by thieves. It can detect attempts to tamper with the ECU, and will stop the components of the engine in an attempt to deactivate the immobiliser. It can also deactivate the alarm system to avoid being the target of attention and allow thieves to get away.

Reversible

The Ghost immobiliser is a adjustable security system that can be removed and installed at any time. It is directly connected to your vehicle's Controller Area Network (CAN) and provides you with a PIN code that only you know. If the PIN code has been entered correctly, the vehicle will not start, and thieves are discouraged from attempting to steal it.

The installation of the Ghost is non-invasive and your vehicle's warranty will not be affected. The system is compatible with any aftermarket alarm or tracker you might have installed. It will also not leave a trace on the exterior or interior of your car. It is not visible to thieves since it does NOT use keys or LED indicators.

Organised car thief gangs are now employing devices to read the circuit wires of vehicles, but the Ghost Immobiliser does not use any of these methods. Instead, it utilizes buttons located on the dashboard or steering wheel to allow you to set the unique PIN code sequence. This code needs to be entered to start the car.

Additionally to that, the Ghost Immobiliser can also safeguard your vehicle from OBD port hacking. This method of theft is becoming more common, and it is one of the most difficult ways to stop. The Ghost Immobiliser helps prevent these thefts since it stops the thief connecting a laptop into the OBD port of your vehicle and cloning keys.

The Ghost can be used conjunction with a vehicle tracking device. This can be very useful in locating your vehicle after it has been taken. It is not recommended to use a tracker for your primary security measure against theft since they do not stop theft. They are also much easier to identify and remove from vehicles than the Ghost immobiliser.

It is simple to install

A Ghost immobiliser is a groundbreaking new technology that can safeguard your vehicle from theft. It works by connecting to your vehicle's CAN (Controller Area Network) system and creating an individual code sequence that is difficult for thieves to crack. It is an inexpensive and efficient method of protecting your car from being stolen.

Ghost is designed to work with all vehicles and models, including those with aftermarket key fobs. The device uses the buttons on the dashboard, steering wheel and central console to create an individual PIN code sequence that prevents thieves from opening your vehicle. It also has a variety of additional features, including a GPS tracker that locates your car.

Many drivers pick this type of device because it provides protection against various types of car theft. It is simple to install, silent, and does not use radio signals. It's also a great choice for those who don't want to purchase a full alarm system. It is, however, essential to employ a professional to install the device to ensure it functions correctly.

If you're considering a Ghost immobiliser, make sure to have it installed by a professional to ensure that it's working exactly as it should. A professional will know how to find the most suitable location for it, and will also ensure that the device is properly connected to your vehicle's electronic components. The installer will also make sure that the device is kept from view and can't be visible to anyone who doesn't have an underlying reason to know about it.

The Autowatch Ghost II CAN Immobiliser can be set to Valet/Service mode, which permits your car to be driven at 30mph without needing the access key. This makes it ideal for valet parking as well as transporting your vehicle. It can also be used in this mode when your vehicle is being serviced by dealers. This mode is easily turned off by the companion app, and reset after every use.

The Ghost is the first aftermarket CAN bus immobiliser that doesn't require any wire cutting. It connects directly to the onboard CAN system of your vehicle and is not detectable with devices for diagnosing or cloning. It is tamperproof silent, completely silent, and does not emit any radio signals. It is reversible, so you can transfer it to a different vehicle if needed.

Edit
Pub: 15 May 2024 17:12 UTC
Views: 49