15 Things You Don't Know About Immobiliser Ghost
The Ghost Immobiliser
Immobilisers are a powerful tool to fight vehicle theft. They stop the car from beginning without a key fob and work well to stop hotwiring and traditional forms of vehicle theft. Modern methods such as relay theft or key cloning are becoming increasingly common.
The Ghost Immobiliser has been designed to counter these trends and make your car inaccessible. It's silent and stealthy and does not rely on radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects with the CAN data network of your vehicle to prevent key cloning or theft. It is a TASSA-approved device and insurance companies have endorsed it. It is silent and almost undetectable to thieves. It makes use of buttons on your steering wheel, the centre console and door panels to make a unique pin code sequence that must be entered prior to being able to start your car. You can create up to 20 different sequences to provide greater security. The system is easy to install and doesn't require additional hardware.
To get the most effective results, it is recommended that you choose a reputable CAN-immobiliser installer who specializes in your vehicle type. Ideally, they will have a workshop close to you that you can visit to complete your installation. They'll also have a variety of tools and materials to assist you with the installation process. They will have basic hand tools, a multimeter, and insulation tape and heat shrink tubing to protect connections. A user's manual will give specific instructions for the wiring in your vehicle.
Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. Double-checking the CAN L and H wires is crucial because a mistake in identification could cause a misalignment of the system. It is also a good idea to label or mark the wires. Also, use a multimeter to verify that the identified power source is able to provide a consistent 12V power supply.
Advanced thieves can use a variety of tactics to evade the Ghost Immobiliser, including blocking and using spoofing signals. These methods are based on amplifying the signal that is transmitted from your key fob to the vehicle's electronic control unit. However, with advanced anti-jamming technology and a vigilant surveillance you can shield your vehicle from these sophisticated attacks.
Security Increased
Ghost immobilisers provide an extra layer to protect your vehicle from theft. It is a PIN security system that can be entered via buttons on your dashboard or steering wheel which makes it more difficult for thieves to take your vehicle. The device is also designed to be hidden inside your vehicle, with no any other lights or signals that could signal a potential criminal to its presence. It is directly connected to the ECU of your car through the data bus. This means it is not vulnerable to hacking or relay attacks.
It's a fantastic option for those who own high-end cars which are at greater chance of being stolen due to their price and popularity. The enhanced features of the system protect your vehicle from key copying and ECU swapping. Some ghost immobilisers are also paired with apps, so you can arm and dearm easily. They also come with a service/valet mode that permits you to temporarily disable them while your vehicle is being serviced or repaired.
Another great feature of ghost immobilisers is that it doesn't require any wire cutting. This is an excellent feature, especially if the vehicle is newer and doesn't have an immobiliser built in. Some systems may also be equipped to work with the GPS tracking device, which can provide an additional level of security for your vehicle. A GPS tracker can also help you reduce your insurance premiums. If you opt to purchase a ghost immobiliser, make sure that it is TASSA verified and that a professional installer installs it for you.
ghost immobiliser for sale with all major brands and models
The Ghost Immobiliser is designed to be compatible with all major brands and models of vehicles, safeguarding your vehicle from theft. It generates a unique pin number by pressing buttons on your steering wheel, console, or door panels. You must enter the code before you can drive. The system is tamper-proof and undetectable. It's also comes with a three-year guarantee. It is also fully accredited by insurance companies and insurance companies, which means it can lower your insurance premiums.
Unlike the standard immobilisers, which utilize your key fob to control the car's ignition, the Ghost system works by connecting directly with the engine controller unit via the CAN data bus. It is almost impossible to disable, remove or hack. Additionally it is possible to use the Ghost system can be paired with an secure iPhone application that allows remote management and monitoring.
You can design a PIN that is easy to remember, yet mathematically, it is impossible to guess for thieves. The PIN can be customised and changed at any point and you can keep your car secure even if it's parked on the street or in a public parking lot. You can also choose a valet or service mode if you need someone who is not driving your car temporarily, for example when it's in the garage for servicing. This feature is also an excellent way to protect your vehicle from being stolen by a shady mechanic. You can opt for the Ghost Call alert to give you extra security. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser is an efficient security device, protecting your vehicle from common methods of theft such as key cloning and relay attacks. It works by connecting to the car's CAN data network and preventing communication with the engine ECU. This system makes it difficult for thieves to hack or replicate your vehicle.
After installation, you'll be required to enter a PIN code up to 20 digits using the buttons on your dashboard and steering wheel to begin the engine. The system is completely concealed and unnoticeable to thieves since it doesn't emit any radio frequency signals. It is also able to be set to change the PIN of the user, which adds security. The system is also designed to stop cutting of circuits and makes it virtually impossible to alter.
If you do have a problem remembering your PIN, there are systems that allow you to communicate with the immobiliser through an app on your phone to disarm it immediately. Some even have an option for service or valet that allows you to start your car temporarily, such as when you need to drop it off for servicing or valet parking.
The Ghost Immobiliser also is undetectable by thieves since it does not transmit radio signals. This is a major advantage compared to other aftermarket security systems. It is also easy to use and doesn't require complex wiring. It can be used in conjunction with dash cams for added security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be hardwired for maximum performance and durability.
Installation
It is essential to select the most reliable immobiliser ghost in order to shield your vehicle from thieves. This device will help to stop car theft by blocking communication between the engine controller unit (ECU) and key fobs. This device blocks thieves from stealing the signal used to start your vehicle. It also can detect when it has been tampered with and alert the owner of the vehicle.
The device is simple to install and connects to your vehicle's existing systems. It does not require any modification to the wiring of your vehicle and can be concealed in a concealed area, like under the dashboard. Follow the instructions in the manual to ensure the device is installed correctly. It is also crucial to test the system after installing it. This will ensure that the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to steal or bypass the system. The installation process typically takes 2-3 hours.
During the process of installation it is recommended that you review the wiring diagram of your vehicle model. This will allow you to locate the CAN High and Low wires. Low wires needed to connect your Ghost to the engine of your vehicle. It is also crucial to double-check the connections to ensure that they are safe and well-insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser during normal operation. It will turn off the ignition of your vehicle in the event that it isn't started with the correct PIN code, which you can set yourself. The ghost of the immobiliser can be changed to Service/Valet Mode in case you require your vehicle to be to be serviced or valet-parked.