10 Myths Your Boss Has About Fiat 500 Replacement Key Cost

Fiat 500 Replacement Key Fob

If your 500 remote key fob has stopped working, it might be time to replace the battery. If you replace the battery, but it's still not working, the problem may be elsewhere.

At United Locksmith, we specialize in making new keys for old automobiles. We have the tools and parts required for this service.

Dead Coin Battery

A dead battery is the most common reason for your Fiat 500 keyfob not locking or unlocking the doors. The coin cell battery in the key fob will drain quickly if you don't use it often enough. If your remote began to show signs of weakness like a loss of range or stopped working completely The battery is probably dead.

Metal clips keep the battery in place on the key fob. If the clips are loose they can cause contact issues, which could prevent the remote from receiving power. By using a small flathead screwdriver, break the retaining clip to remove the battery and replace it with a new one. Use a battery that has the same size, voltage and specifications as the original.

Exposure to water can cause the key fob to become corroded or damaged. Even a small bath in warm, soapy water can cause damage to the chip. It is best to keep your key fob in a dry location.

Water Damage

If your key fob isn't functioning properly, it could be caused by water damage. Key fobs have rubber seals to protect them from being damaged by light rain or splashes of water, however it is essential to keep your car keys from being tossed into the pool, ocean, and washing machine!

The key fob is equipped with an electronic chip inside that transmits a signal car's immobilizer system. This is the reason why your 500 can start or lock, but in the event that the chip becomes wet, it can no longer function.


If you're trying to determine whether your key fob functioning it is possible to clean the internal electronics with isopropyl or an electronic cleaner. It is best to replace the key fob when it is submerged in salt water rather than try to repair it yourself.

While a replacement fob could cost you a little bit of money, it is much less expensive than having to pay for your Fiat 500 to be towed to the dealership and repaired! In addition, you can do it yourself in a few easy steps. Be sure to have the correct type of battery prior to opening your keyfob. This task is far simpler than it appears, and you can find step-by-step instructions online for nearly every key fob for your car.

Faulty Chip

The chip in the key fob communicates with the immobiliser on your car to ensure that the vehicle will only start when right keys are in place. If the chip is damaged, or damaged in any way it will not start.

A chip that is defective can happen due to many reasons, but the most common cause is water damage or an unresponsive battery. It is recommended to leave the repair to a professional locksmith, who can replace the chip in a short time and at a a reasonable price.

If your key fob does not work after exposure to clean tap or rain water take it off the battery. Clean the electronic component with a paper towel. If the key fob will not function, there is a chance that it has a fried component and needs to be replaced.

Many people will seek out their dealer when they are in need of an entirely new Fiat key fob, but this could be a costly option. If you're seeking a cost-effective solution to get your Fiat key fob repaired, look no further than United Locksmith. We have the tools and experience needed to fix your Fiat fob quickly and professionally. way.

Faulty Receiver Module

Fiat key fobs transmit an electrical signal to the vehicle, which will unlock and close doors (and start the car if it has an automatic transmission) up to 50 feet. However, there are several things that can cause the fob to cease functioning. fiat 500 replacement key includes a dead coin-battery, water damage, worn-out buttons as well as a receiver issue. signal interference or an issue with the chip.

If the fob has been placed in a pocket that experienced extreme trauma, such as being dropped on hard floors or being washed in a washer or dishwasher, it might not be capable of communicating with the car's Body Control Module (BCM). The BCM is a security system that can only accept signals from genuine keys.

If this is the case, you must replace your fob. A professional locksmith can handle the entire process of replacing your key including programming a new key to your 500. In fact, they can provide you with a clone key that functions the same as your original fob (and costs less than the price).

Edit Report
Pub: 25 Apr 2024 03:39 UTC
Views: 31