10 Strategies To Build Your Peugeot Keys Empire

Peugeot 208 Key Replacement

It is better to leave the replacement of Peugeot 208 keys to auto locksmiths who have the required equipment and skills. They will be able to make and program new keys much quicker than a dealership and at a lesser cost.


A dead coin battery is the most likely cause the reason your key-fob stops locking or unlocking the doors. There are also other reasons that the key could be malfunctioning.

Dead Coin Battery

A dead coin battery can stop your Peugeot 208 from locking or unlocking, and cannot start the engine. In this instance, you will need to choose the alternate method to start that is described in the owner's manual.

Another reason why your 208 might not be starting is that the spark plugs are been worn down. The spark plugs ignite fuel to start the engine. They have a limited life span. They'll eventually degrade in the event that they aren't utilized enough.

Fortunately, there's an easy solution for this issue. The best solution is to check the voltage of your car battery using a multimeter. If the voltage is lower than 11,5 volts, it's time to replace it. If the battery has corroded it is crucial to clean its contacts. peugeot 406 key fob can be accomplished by removing the rubber covers from the two terminals of the battery, and then using a wirebrush to remove any corroded battery parts. Then, you should reconnect the positive and negative pole cables.

Water Damage

If your 208 won't start and the battery isn't flat, then you need to make sure that the spark plugs are in good working order. It could be that they are dirty and they don't spark. This can be fixed by cleaning the spark plugs in a workshop.

Peugeot cars have transponder keys that works with the car's immobiliser system. This ensures that only the correct key can turn the engine. If the chip in the Peugeot key is damaged then it will not transmit the proper signal to the vehicle.

Water damage is a common reason for this issue. This is a common issue in colder climates where the vehicle is exposed to rain or snow. In this situation, contact an experienced locksmith who will have the tools and equipment needed to modify the key. They'll also have the latest technology and equipment required to create a Peugeot smart key. The process shouldn't take longer than 15 minutes.

Contacts with the battery may be damaged.

Peugeot replaced the transponder chips with a new type that uses electronic components that are mounted on a circuitboard. This new technology works great when it's brand new, but as time passes, the circuit boards start to wear out and stop functioning correctly.

This can prevent the immobiliser from activating so the vehicle won't start. Contact an Peugeot specialist, or a locksmith, if this is the case.

Another issue that is common is when the battery of the key fob is dying, this causes the blade of the key to stop from entering the lock. A locksmith for cars can replace the battery and cut a new blade for you, it's usually a simple fix.

Faulty Receiver Module

It could be that the receiver module has a problem in the event that your Peugeot key fob fails to function after being dropped on the floor, exposed to a sudden rainstorm or accidentally washed. The receiver module is responsible for transmitting radio frequencies to the onboard computer which controls the central locking system of your Peugeot vehicle.

The key fob itself is fitted with rubber seals which prevent water from reaching the electronic chip inside. However prolonged exposure to water may penetrate these seals and damage the chip. The high salt content in the pool or ocean waters can cause damage to the key fob, especially if it is submerged.

The module will have to be replaced if the Peugeot spare key is no longer working. This can only by done by a Peugeot specialist or a professional auto locksmith. Peugeot keys are, unlike other vehicles, are protected by an immobilizer system. This requires the correct programming to allow the car to start. This is why it is imperative that you should only rely on a Peugeot locksmith to create and program the replacement.

Computers with faulty on-board computers

The computer on board of your Peugeot is responsible for many of the features in your car, including airbags and power windows. The computer on board will display a code if something goes wrong. The code will be stored in the system until the issue is resolved. Most often, this involves replacing the computer on board.

The most common reason for the warning light for the airbag to flash is corrosion or loose connections within the sensor. This can be caused by wear and tear, ageing or exposure to moisture and salt. It is essential to have this issue addressed as quickly as you can, as an airbag that is not functioning properly could be dangerous in the event of an accident.

If you see the error "card not found" on your Peugeot key fob, the battery in the key fob may be weak or dead. This will stop the key fob sending a signal to deactivate your vehicle's immobilizer. You can test this by pressing the unlock button on the key fob, then attempting to start your vehicle. If this doesn't work then the battery on the key must be replaced.

Edit
Pub: 24 Apr 2024 13:32 UTC
Views: 3