Peugeot 208 Key Replacement: 11 Thing You're Not Doing

Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob has stopped working for a while it could be due to a dead coin battery or water damage or receiver module issues, or a defective electronic chip. Fortunately, all of these are simple to fix, and you'll have your vehicle back to normal in no time!

The key blade could become worn out and lead to a faulty car key. This is an easy fix by visiting your local Car Key Man Auto Locksmith and let them fit the new blade for you.

Battery


The key fob inside your Peugeot 308 may die or become weak enough to not send a clear signal. The key fob may not function and stop you from locking or unlocking your doors or even starting the engine. You'll need a new battery for your key fob to correct this.

You'll have to purchase the replacement battery from an auto parts store or at your local hardware store. Make sure that the battery is brand new and not sitting on the shelf for too long. A brand new battery will have greater capacity and be able to send a stronger signal the car.

After replacing the battery try unlocking the doors and locking them with the key fob. If the doors don't open it's likely that the receiver module in the car is the culprit. Your local Peugeot dealer can reprogram the receiver module.

The internal chip of the key fob may also be damaged. It's possible to cause damage to your key fob if you drop it on the ground, or expose it to moisture. The rubber seals that shield the chip from moisture may become worn down over time especially if your key ring is exposed to water for extended durations, like submerging it in the ocean at the beach. To avoid this from occurring, it's crucial to keep your key fob away from moisture and to never let it come in contact with water.

Water Damage

If your key fob is wet and soaked, whether you tossed it into the pool or fumbled it into a puddle don't think it's a case of lost cause. The key fob is protected by rubber seals but prolonged exposure to water could harm its electronic chip. Water is a great conductor, and any water that is absorbed into the key fob will trigger short circuits in series which eventually damage the electronic chip. After taking the batteries out, clean the contacts with isopropyl, and then dry them completely before putting them back in.

A dead battery might be the reason why your Peugeot 308 won't start. Jumper cables can be a great method of restarting the engine when you have an extra car. If the battery is damaged, it must be replaced.

Another possibility is a bad receiver in the vehicle, which could prevent it from receiving a signal from the key fob. It could be due to a problem with the antenna or wiring, or the key fob may be damaged. It could be necessary to program a new fob into your vehicle if you are using one. If you're unable to solve the issue yourself seek out an expert technician. A professional who has been trained in the field will be able diagnose the problem quickly, and fix the issue immediately.

Radio Interference

Interference can trigger symptoms such as a fob that's not recognized or has a restricted range. The interference can be transmitted or radiated the latter caused by speaker and power cables passing too close to electrical parts. Generally speaking, rerouting cables or moving them away from these components can solve the problem.

It's unlikely that someone is watching your key fob signals to steal your car, however it's possible that the signal has been drowned out by radio frequency interference. This is a straightforward issue to solve.

If you're experiencing a problem with your key fob not being recognized, try a new battery. Make sure the battery is the right size and type. Batteries that are not of the correct size can cause damage to your device.

Certain alarm systems from the aftermarket and radar detectors use the same radio frequency as your key fob, and could cause them to interfere with your key signals. replace peugeot key G28CarKeys is advised to avoid having these devices attached to your key fob.

Pairing Issues

A car's remote keyless entry system contains an antenna that receives radio frequency signals from the key fob. If this receiver has developed issues, you will not be in a position to start your car regardless of whether the key fob is working and is changed. The issue can be caused in a number of ways, including a dead battery in the coin-cell, or water damage. The receiver could be malfunctioning because of an error in the software or internal damage to the key itself.

The coin battery in your Peugeot 308 keyfob has probably failed. This battery can be easily replaced, but you need to be sure it's the appropriate battery for the key fob. Using an incorrect battery could lead to further problems with the key fob, therefore it is recommended to use either the original battery or an alternative that is similar in size, voltage, and specifications.

Your Peugeot 308 keyfob may not function if linked to an unrelated vehicle. You may have accidentally given the key fob to a friend, or the key was used to unlock other vehicles. This can be solved by reprogramming your key fob using an OBDII scan. The scanner will usually ask you for specific details about the vehicle, such as the VIN or engine type, so it's important to fill in the correct information.

Edit

Pub: 28 Jun 2024 22:18 UTC

Views: 9