5 Reasons To Be An Online Car Ghost Immobiliser Shop And 5 Reasons You Shouldn't

Car Ghost Immobiliser

Ghost Immobiliser is a sophisticated system that blocks your car from starting if it does not have an individual pin code sequence, inputted via existing buttons (such as buttons on the dashboard or steering wheel). The device is inaccessible to thieves and is quiet to operate.

It can be helpful in preventing hotwiring, as well as newer methods such as relay thefts. You could also see a decrease in your insurance cost.

No Radio Frequencies

A car ghost immobiliser operates differently than an ordinary immobiliser because there is no radio frequency transmitted which prevents it from being bypassed by thieves using a simple and readily available key cloning device. Ghost immobilisers stop your car from starting in the event that a thief has copied or taken your key.

Ghost immobilisers can also be used to prevent relay attacks. The signal from your key fob is amplified to fool the system to allow your car to start. The Ghost will recognize this and not start the car until you enter the PIN code. This is a great method to combat tech-savvy thieves who have access to affordable and simple-to-use tools to steal or clone your vehicle.

The Ghost can be set up discreetly, without causing damage to your car. It will only work after the correct pin sequence has been entered. This is only known by the owner, so nobody else will be able to use your vehicle without your pin code. Certain systems let owners set up valet or service mode, which allows them to temporarily allow someone else to drive the vehicle without revealing their pin number, thereby protecting them from opportunistic thieves.

In addition to being user friendly and quick to disarm and disarm, the Ghost can be linked up with a car tracker to make it possible for you to track your vehicle. Some insurance companies offer discounts on car insurance for vehicles equipped with Ghosts. This is great news because it improves the security of your vehicle.

The Ghost immobiliser, though not Thatcham approved is an aftermarket product that has been vetted by an independent expert and found to function. If you're thinking about buying a used car that has the Ghost immobiliser fitted, then ask the seller if they are willing to transfer it to your new vehicle. This will make your new car more secure than in the event that the previous owner had not transferred it.

No Circuit Cuts

Even if your vehicle is stolen, thieves will not be able to start it. The thieves will need to know the exact buttons to unlock the vehicle, and they won't be able to do this without knowing these sequences. go right here will deter them and prevent them from attempting the theft.


If you have an GPS tracker in your Ghost could also serve as an anti-theft device as it can send a signal to the tracker which will activate a siren and alert the tracker of attempted theft. This feature can be activated at any time via your online dashboard.

When you connect your Ghost to your CAN data network, it will identify the vehicle and its owner through the unique pin code that was created at the time of installation. This allows the device communicate with your vehicle's ECU and disable the engine. This means that only the owner of the vehicle or a person with the PIN code, can start the engine.

Because the pin code is created from existing buttons within easy reach of the driver (such as cruise control and stereo mute) it is mathematically inaccessible to guess by any potential thieves. Your engineer will also provide you with an emergency Pin Code override card which is similar to scratch-off lottery tickets. It simply needs to be scratched off to reveal the code and instructions.

Your Ghost is not detectable using these methods, since it does not use circuit breaks or radio frequencies. This makes it unaffected by the modern methods used by organized gangs of thieves who specialise in codes-grabbing technology and RF scanning. It is a product that lasts for a lifetime that is easily removed from your vehicle if you decide to sell it. This means that you won't lose any security that you have invested in.

No Key Fobs

With the rise of vehicle thefts in the UK proactive measures are needed to protect beloved cars from opportunistic thieves. The Autowatch Ghost Immobiliser is a groundbreaking device that offers an effective defense against key cloning attacks, hacking and signals relay attacks. It is a discrete and highly effective car safety system that is simple for anyone to install.

Unlike traditional systems that rely on key fobs the Ghost immobiliser does not have LED indicators and is not operated through a signal relay. It is not affected by signal interference and cannot be activated using stolen or damaged remotes. It is also tamper-proof and does not have any external wiring, making it hard to take off.

It shields your precious possessions from key-long, hacking and key theft by stopping the engine from beginning until you input a specific PIN code. This is done by using existing buttons on the vehicle, such as those on the steering wheel and door panels.

It only works when you enter the correct pin code. This makes it difficult for thieves to take your vehicle, and is simple to use. If you're worried about forgetting your pin code or forgetting your pin code, you can ask the installer to supply you with a driver's card that permits you to operate the car in the normal way.

The absence of key fobs and LED indicators also means that the Ghost immobiliser is not detectable by the diagnostic equipment or RF scanners that are commonly used by thieves to identify the presence of the system. This method of installation is more stealthy and enhances the security of the system, and permits it to be installed in a place that is difficult for thieves.

Ghost immobilisers are a low-cost and highly effective deterrent against theft. They also increase the value of your car. Some insurance providers will also recognise them and offer reduced premiums.

No Damage

If your car is fitted with a ghost immobiliser you can rest your assurance that your vehicle is protected against cloning, hacking, key fob theft, and other typical methods of theft. This is particularly important if you've put in lots of money and effort customizing your vehicle or own an expensive or rare model. Ghost immobilisers work in a silent manner, leaving no trace of instillation and requires no new components to be installed.

The system allows you to create an individual pin code that needs to be entered to allow the engine to begin. It works by using buttons on your steering wheel or console, as well as on your doors. The sequence can be changed by you at any time, ensuring that even if someone has your pin number it is not possible for them to start your car. It is also simple to turn off the device in an unservice valet mode to allow your car to be removed to be cleaned, serviced or an MOT without it being activated.

This means that even if your car is cloned or stolen, the thief will not be able to start your vehicle and could be caught. The system will also notify you of any manipulation of the wiring of your vehicle, such as signal interception or cutting. This information can be transmitted to your smartphone to ensure that you are aware of the security status of your vehicle.

However, there could be a point at which you want to remove or disable the Ghost Immobiliser, perhaps to maintain it or sell it. In this instance you'll need to follow a careful process in order to disconnect the device without causing damage to the wiring system of your vehicle. It is strongly recommended that you wear protective gloves during the procedure, and also make use of a flashlight to illuminate dark areas of your vehicle where the immobiliser could be. You can also consult any documentation you might have like user manuals or installation instructions, to determine the exact location of the device.

You can then reconnect the battery to the car and then test it to confirm that the immobiliser is working properly and that all electrical components are functioning in the way you intended. You will need to use soldering or electrical tape to shield any wires that have been cut. Check to see if any exposed wires are in place, and that any dangling wires are secured using zip ties or other suitable methods. Also, schedule a car inspection with a professional ensure that the removal process did not cause damage to other systems within your car.

Edit Report
Pub: 01 Dec 2024 06:05 UTC
Views: 19