Why Mazda Key Replacement Is The Right Choice For You
How to Fix Common Mazda 3 Key Problems
The Mazda 3 is a stylish compact car that has a smooth handling and a luxurious interior. It's also a good bargain compared to other compacts available.
It can be a huge hassle to lose keys. Not only will you have to pay the dealer to tow your vehicle and reprogramme your key as well, but it could also cost you money to replace the spare keys.
Key not locking or unlocking doors
It is dangerous to leave the doors unlocked particularly when the vehicle is moving. If the door is opened while the vehicle is moving it could cause passengers to fall or even be injured. Keep keys out of the reach of children to avoid this. Children may fi nd them appealing and may want to play with them, which can cause the power windows or other controls to work and make the vehicle move.
If you notice that the key fob isn't locking or unlocking doors, it probably means that the battery is dead. The button cell battery on the key fob has a short lifespan, therefore it is crucial to replace it often. A good battery will last between two and four years. When replacing the battery, it is important to choose a replacement battery with the same voltage and size as the one that was originally.
A key pairing issue could be the reason for your key fob not working. It's possible that the keyfob wasn't properly paired with the vehicle when it was purchased. In this instance the dealer has to reprogramme it. Fortunately this can be accomplished in under a minute. mazda bt50 key replacement can also reset any residual electricity in the on-board computer. But, this will not change the ability of the key fob to lock or unlock doors.
Dead coin battery
It's possible that your battery is dead if the key fob doesn't turn on or unlock your vehicle. It's a frequent issue, but it is one that can be solved. You can replace the battery yourself, avoiding going to the dealer. The process is simple and requires just two tools.
First first, press the auxiliary button on the back of your Mazda flip key. This will let you remove the metal auxiliary keys. After the auxiliary key made of metal is removed, you'll find a slot on either side of the fob case. Use a tape-wrapped flathead screwdriver open the case starting with one side and then the other. Gently pull the two parts of the case and put them aside.
You can now replace the key fob's battery. You don't want damage to the rubber ring on which the battery is positioned. After the battery has been replaced, you can reassemble the case and enjoy your new key fob!
Most stores that sell batteries also carry a replacement battery. Find a CR2025 coin cell battery. These batteries are typically used in calculators and watches but they can also be found at auto parts stores, or online. The process of replacing the battery in your Mazda 3 is easy and quick, and can save your money on a trip to the dealer.
Key Pairing Issue
If you've been driving your Mazda 3 for a long period of time, and then it suddenly stopped working, it may be a problem in the remote keyless system receiver module. This is especially likely if the key fob's internal chip is damaged. This can be caused by many factors such as an unintentionally dropped or wet key.
The key fob's electronics are protected by rubber seals therefore a raindrop shouldn't cause any damage. However, submerging it into ocean or pool water is an issue that is much more severe due to the highly electrically conductivity of salt can cause damage to the electronics.
If your key fob does not function, you might require a new battery. A quick search of the web will reveal that there are numerous third-party replacement batteries. It is important to keep in mind that these batteries may not work with your Mazda 3. It is best to purchase from a dealer to make sure that it is compatible with your Mazda 3.
After replacing the battery, you should be able to use your key fob again. If the remote doesn't respond when you press the lock button, it's likely that the key has been stuck in power saving mode. Press the lock button five times and hold it for a while until the red light appears.
Reprogramming the key
The keyless entry system in the Mazda allows you to open and start the car without the standard key. It's a great feature, but the process of reprogramming the remote or key can be confusing for a few people. This requires a machine which is only accessible to the automotive locksmith or dealer. This machine is connected to the computer in the vehicle and it begins the programing process for a new key or remote.
The first step is having at minimum two keys that work for the Mazda. Then, you can proceed with the reprogramming of an existing key. Initially the functions of the new FOB are turned off to safeguard the vehicle from theft. Once you've resettled the new key, you'll be able to activate these functions in the future.
After that, you can use the new key to unlock the doors and start the engine. Check it out first to make sure it is working. Keep a spare set of keys if you're concerned about losing your keys.
Adding a spare key to your Mazda is a fairly simple process. Just follow these steps and you'll be able to save a lot of money, as you don't have to pay for the dealership to complete the task for you. This can also save you from the expense of a tow and save money on a new spare key.