Monumental Land Surveys
A monumental land survey is really a kind of land survey dealing specifically with the boundaries of the property. All monumental land surveys use physical monuments to mark the boundaries on the land itself. Commonly, the corners of the house are marked with an extended iron rod driven vertically into the ground, though there are numerous other styles of physical monuments which might be used.
These monuments are made to be as permanent as possible, though land surveyors many decades ago used wooden posts or natural features which may be destroyed over time, rendering it difficult to re-trace their work today. Monuments in use today could have a cap on top of the iron rod identifying the surveyor who placed it.
This physical monument allows the easy finding of the boundaries and corners of the house when one is physically on the land, although the monumental land survey itself does have some limitations as far as the other information provided. For instance, it usually isn't worried about any improvements on the house, such as fences or homes, and will not determine whether these were built to code or comply with zoning regulations.
Often, Daylight Surveyors New Barnet is undertaken in combination with other styles of land surveys to show additional information concerning the property. For example, a monumental survey could be combined with a title survey, that may examine more than the boundaries in determining anything affecting ownership of the land involved.
Oftentimes, a monumental land survey may be undertaken if you find a dispute on the exact land boundaries. For example, if a fence has been built or is about to be built on the land, a monumental land survey can mark the exact corners and the boundary between your two properties so that the fence's position based on the legal property boundary can be evaluated. The monumental land survey can be useful when in the planning stages of a construction project.
Before a land surveyor may place the monuments, there are lots of other steps to take, a lot of which are actually done away from the property in question. Actually, placing the monuments is near the end of the monumental land surveying process. First, the surveyor must clarify exactly where the boundary should be located by looking at the title and legal description of the property, among other information. Then, these boundaries must be measured on the land itself before they could be marked, and the surveyor will seek out any preexisting corner monuments from previous surveys, evaluating their accuracy to determine if the boundary was correctly placed by the previous surveyor. Finally, the new monuments are set into place.
Boundary monuments are put at every corner of the house, including any angle or change of direction of the boundary line. The survey data is then recorded in a land survey plat. The state recording of the survey will provide a basis for just about any future land surveys of the house. If such information is never recorded properly, it will not be available for future land surveyors if the land is re-surveyed at any time. This information includes a scale drawing of the land and its boundaries, all necessary dimensions to allow a surveyor to establish the property boundaries while in the field and a detailed description of all monuments found or applied to the property.