15 Reasons You Shouldn't Ignore Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism faulty? Maybe the window or door handles aren't able to connect properly or are difficult to use.

It is crucial that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at reasonable costs.

Snapped Key

It can be frustrating when a key is snapped into a lock. It could also be a security risk since the door might not lock and leave you vulnerable to intruders. There are a few easy fixes you can make to fix the problem and get your door working again.

Keep calm. If you panic you may end up pushing the damaged key piece further into the lock.

Spray WD-40, or another penetrating lubricant, into the lock. This will allow the broken piece to emerge more easily. You can also use the screwdriver to break off any pieces stuck. If you have a part of the key that is stuck, grab it with a paperclip or other thin metal object and pull it. Both methods work well, but be cautious not to push the broken piece of the key even further into the keyway.

Some paperclips have grooved edges that can be used to extract hooks and some Jigsaw blades can also be used for this function. If you don't have any of them handy, you can make use of needle-nose pliers that bend to create hooks. Finally, you can make use of a pair of tweezers to grab and pull out the last bit of the broken keys.

If you can't get the broken piece of key out, you can try using a lock de-icer. It's usually available at most hardware stores, and it is used to freeze any water or ice that could be inside the lock.

If none of these solutions seem to work, it may be time to call a locksmith. The experts at Fitlocks can quickly fix issues such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms so that they are more easy to use. You can schedule a double-glazing repair online or contact us to discuss your needs.

Broken Cylinder

A broken cylinder is an immediate security risk. Luckily, it's an easy repair for an expert locksmith to complete. To repair the cylinder, locksmiths will need to tap it. This can be accomplished with a hammer, or any other tool. The best method is to use a wire or a long match. The match or wire's end close to the keyway. The locksmith will then hit the lock to break it. This is much better than using a heavy hammer that can cause damage to the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block and head are made of various metals, including cast iron and aluminium. When the various metals are heated and cool at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, thus leading to cracks.

Corrosion can be a reason for fractures in cylinders. If the cylinder block and head are not maintained in a timely manner they may be corroded or rust, which can cause them to expand faster than expected. Over time, this can cause cracks.

If your uPVC door or window lock is stiff or requires a lot of pressure to turn, this can be the result of many things. This problem can result from a defective locking mechanism or misalignment and also a worn out handle.

This is a simple and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith should be able solve this problem within an hour of arriving at your home. They can replace the locking mechanisms, or change the window handles and replace the gearboxes, depending on your particular requirements. A professional locksmith will always be able advise you on the most cost-effective solutions for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders, which give you an extra layer of protection against burglars. It is a small cost to enjoy the peace of mind that comes from knowing your uPVC door is secure.

Broken Handle

Window handle locks have complex mechanisms that become less effective as time passes and usage, so it's no surprise they occasionally break. It isn't always easy to pinpoint the reason for the problem and fix it correctly.

The issue could be in the internal locking mechanism or the latch, fixing your broken handle will improve your uPVC double glazing door's security and allow you to stop the draughts. It is costly to replace or repair your handle if it is not done correctly and can also harm the frame and lock of your door.

With the window in the open position then loosen the screw holding the handle with a screwdriver. The screw should be on the inside of the back plate, and is normally hidden by an aesthetically pleasing cover for the screw reasons. Be careful not to lose any internal parts within the handle, such as the levers or plates on either side of the spindle. Keep them in the same arrangement to make it simpler to replace them in the event of a need.

Then, turn the handle so it's at 90 degrees towards the window frame. Then, loosen the screw on the back of the handle which holds it to the internal spindle with another screwdriver. Once the screw is free, you can pull the handle out and remove the broken spindle. Replace double glazing repairs with a brand new spindle, making sure it's the same length (you can find them online or in hardware stores). Screw it into the frame. Be cautious not to overtighten as this could damage the handle or the window frame.

Ensure the new handle is correctly fitted Close the window and test the handle. The hope is that it will function smoothly and you'll be able unlock your window.

Make sure to check that your uPVC window is closing properly when you're using the handle. If they're not closing properly cause draughts and damp in your home, as and also affecting the energy efficiency of your home. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is usually the case that the spindle in a handle breaks rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that operates a locking mechanism in the frame of the window. The handle is attached to a rod in the centre that triggers a set of cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism does not open when the handle is turned, it is possible that the spindle is broken, this can be an extremely frustrating issue.

There are solutions to this issue. A reputable locksmith can swiftly and effectively fix the issue. A professional locksmith will be able disassemble the window's handle using a tool that removes the wheel portion that houses the spindle. This is done without damage to the handle or the window frame.

After removing the wheel the technician will inspect the spindle and determine the reason for its break. This involves disassembling the spindle and inspecting each component, noting any wear or damage. This process is usually carried out by technicians working in an environment that is clean.

Then, clean the damaged spindle. This will remove any debris or dirt that might be preventing it from working normally. The spindle could then be repaired or replaced. If it is being replaced the technician can take a dowel of a similar size to the one used in the first and drill mating holes in both pieces of the spindle. This ensures that the new spindle is precisely matched to the handle.

If the damaged spindle can't be repaired it may require replacement. Home centers sell generic replacements. However, if the design of your window is rare then it is necessary to contact a wood worker or cabinet maker who can replicate the exact model for you. Once the new spindle has been installed it can be positioned to the handle by line up the holes for screws in the handle and the frame existing screws. Once the new handle is seated you will be ready to operate your uPVC window.

Edit Report
Pub: 12 Feb 2024 04:23 UTC
Views: 12