5 Cliches About How To Install A Ghost Immobiliser You Should Avoid

How to Install a Ghost Immobiliser

Ghost immobilisers can be an effective deterrent to car thieves. By combining this device with other security systems and staying vigilant, you can put together an effective defense against the latest, technologically advanced thieves.

Ghost immobilisers will shield your car from hotwiring and relay car thefts by having you enter the pin code to start the vehicle. It makes use of buttons already in your centre console or steering wheel, so it's undetectable to criminals.

Identifying the Wires

It is essential to secure your car as more and more vehicles are being taken without owners' keys. Ghost immobilisers are a great way to add a layer of protection for your vehicle. It blocks all signals from your key fob so that it's impossible to start the vehicle without entering a PIN.

While you can install a ghost immobiliser yourself, it is recommended to have an expert technician complete the task for you. A professional technician will know where to install the device and how to connect it to the wiring of your vehicle. The installation process is not easy and it is crucial that the connections are done correctly to avoid damage or malfunctions.

To get the most effective results, it is recommended to work in a well-lit location and wear the appropriate safety gear. It is also recommended to read the user's manual and familiarize yourself with the wiring system. This will aid you in identifying the wires required for installation and make sure that you have the right tools and equipment to complete the job properly.

Once the wiring is connected, you can reconnect the battery and test the system to see whether it's functioning as intended. Also, ensure that the battery's terminals are secure to avoid electrical issues. It is also important to label the CAN L and CAN H wires with labels or tape so that you are capable of keeping track of them during the installation process.

The Ghost Immobiliser allows you to put your vehicle into Transport Mode if you want someone else to drive it for a short period of time for instance, for valet parking, or if the vehicle requires maintained. This allows you to input the code via the service button on the steering wheel, the centre console or door panels, and then it will enter PIN mode for changing the code.

Some thieves attempt to evade ghost immobilisers using jamming and spoofing devices that block or send fake messages to the system. This can be thwarted by investing in the latest anti-jamming technologies and monitoring your Ghost Immobiliser for indications of tampering.

Disconnecting the Battery

The ghost immobiliser is a modern security device, has been designed to stop car theft. It makes use of cutting-edge technology to monitor the engine and deactivate it when the correct PIN is entered. This stops the vehicle from being stolen by thieves. The system is very effective and stealthy. It doesn't have any visible indicators that would deter criminals. However, there may come a time when you need to take the unit off for maintenance or upgrades, or even to sell your vehicle.

This process requires specialized tools and skills, since you will be working using wires and bypassing specific factory components. Additionally, it is crucial to follow the step-by-step directions provided by the manufacturer of the ghost immobiliser. You should also consult an experienced auto electrician or mechanic, particularly if you don't have any prior experience working on cars.

After identifying the wires and disconnecting them after that, you must check the condition of your battery. Verify that the battery is clean and free of corrosion and that all connections are secure. Consider replacing the battery if necessary to ensure it is strong enough for the electrical requirements of a security system aftermarket.

After you have disconnected the wiring you can take off the ghost immobiliser. Wire cutters or strippers can be used to cut off the wires. Be careful not to damage the wires or their terminals. Be sure to label each wire so that you can reconnect them properly in the future. If the wires were connected, use a heat resistant tool to break the connection. To prevent short-circuiting, it is crucial to wrap the wires in insulation tape or heat shrink tubing.

Connect the wires to the constant 12V power source. Use the fuse tap to protect the connections with a fuse. Finally connect the grounding wire to a solid grounding point on the chassis of the vehicle.

Once you've reconnected your wires, start your vehicle and enter your PIN. Then, try starting the engine once more. If it fails to start the ghost immobiliser has been successfully removed.

Making Connections


Ghost immobilisers are an affordable solution to increase the safety and security of your vehicle. It connects to the CAN bus system in your car, capturing signals and preventing the vehicle from starting until the right PIN code has been entered. This device is practically impossible to bypass which makes it a perfect option for those who need additional security and peace of mind. When used in conjunction with a Thatcham Approved tracking system, it can also help to lower your insurance premium.

It is crucial to get and review the wiring diagram of your vehicle model before you begin the installation. The diagram serves as a reference to locate the wires required to make precise connections. Using the proper connections or soldering techniques will ensure that the connection is long-lasting and secure.

The wires that connect the Ghost immobiliser to the CAN bus system have to be properly identified and connected. It is a good idea to use small pieces of tape or labels to mark the CAN H and CAN L wires, as this will avoid confusion during the installation process. The position of these wires will be different on every vehicle, so it is important to consult the wiring diagram for your vehicle as well as online resources when identifying them.

When the correct wires have been connected after which the power to the Ghost immobiliser will be restored. It is recommended to test the immobiliser by launching the engine but not entering the PIN code. This will confirm the immobiliser is properly installed and functioning as intended. It is important to test your immobiliser regularly. This will allow you to identify any problems or issues early.

The ghost immobiliser is able to be installed quickly and without modifying your vehicle's wiring. It is a fantastic option for those who want to add more security to their vehicle, since it can be used in conjunction with a Thatcham approved alarm or tracker that will send you a notification on your phone or tablet if the vehicle is damaged.

Mounting the Unit

The Ghost immobiliser is a great an deterrent to thieves of cars especially when it is paired with a GPS tracking device. The device makes use of buttons on the central console, door panels and the steering wheel to create an exclusive sequence that only you recognise to stop your car from getting started. It is also weatherproof and tamper-proof. It comes with a 3 year warranty and is endorsed by a variety of insurance companies.

It is important to carefully adhere to the steps when installing the device. While autowatch ghost 2 immobiliser are comfortable handling the work on their own, it's best to seek out a professional you are uncertain. Wire strippers and multimeters are essential tools to identify the wiring and create precise connections. It's also an excellent idea to buy some insulation and electrical tape for protecting the connections from damage. After the installation is completed, it's a good idea to check the device to confirm that it's working as intended.

Ghost immobilisers are a great way to secure your vehicle particularly in areas that have high rates of crime. It can be linked with an iPhone application to facilitate management and monitoring. It blocks key cloning, ECU-swapping, and other security threats. It's popular among vehicle owners who want to protect their investment.

The Ghost II immobiliser is designed with a slim, low-profile design that makes it invisible to thieves. It is connected to the CAN (Controller Area Network) system of your vehicle and prevents the engine from starting unless a PIN code is entered. The PIN code is generated by a unique sequence of buttons on the steering wheel, centre console or doors and can be changed at any time. The device is also tamper-proof and comes with a GPS tracking system to assist police in locating your car in case of theft. It's a great option to safeguard your vehicle from thieves and is Thatcham certified.

Edit Report
Pub: 07 Dec 2024 08:45 UTC
Views: 18