Laview Camera Blinking Blue Light
Your LaView camera is probably in pairing mode and trying to connect to your WiFi network if Laview Camera Blinking Blue Light.
The camera may be having trouble finishing the setup or establishing a strong connection if the blue light blinks continuously without connecting.
Make sure that the camera is within range of the router and that your WiFi network is operational before attempting to fix this.
It is advisable to move the camera closer to the router during setup as weak WiFi signals might lead to connection problems.
If necessary strengthen the signal in the region where the camera is mounted by using a WiFi extender.
Remove the plug, wait ten seconds and then re-plug the camera to resume it.
Apply the same principle to your router by unplugging it for thirty seconds and then plugging it back in.
Refreshing the connection and fixing any transient network issues may be achieved using this.
Press and hold the reset button for ten to fifteen seconds to return the camera to its factory settings if the blue light keeps flashing.
After a reboot the camera will enter pairing mode again enabling you to use the LaView app to complete the setup procedure once more.
Finally make sure the LaView app and the firmware on your camera are current. Outdated software might lead to connection problems.
Next reboot your network and the camera.
For more troubleshooting get in touch with our experts if issues continue.