Don't Forget How To Install Ghost Immobiliser: 10 Reasons Why You Don't Need It

How to Install a Ghost Immobiliser

A ghost immobiliser is a hidden security device that protects your car from key cloning and hacking. It works by stopping the vehicle's engine from starting until it is activated using a PIN code that can be up to 20 characters long.

This additional layer of security is not detectable by thieves who might not be expecting it. Certain systems come with an app that allows the owner to disarm their immobiliser in the event of forgetting their PIN or utilize the service/valet mode.

Connecting the vehicle's CAN Bus

The Ghost 2 Immobiliser is a cutting-edge security system, is able to be integrated directly into the ECU of your vehicle. It is a subtle protection against thieves. It is highly effective and user-friendly and is a great option to add to your vehicle's security arsenal. However, just like any other anti-theft device, it's not 100% reliable and requires regular maintenance to ensure its operation. This guide will help you make the most of your Ghost 2 immobiliser.

CAN (Controller Area Network) is a robust serial network that allows microcontrollers to communicate with each other in short distances, without the need for central control units. It is designed for multiplexing electrical wiring inside vehicles to save on copper and has a number of advantages, such as low cost and easy use.

In the majority of modern cars, the CAN protocol is used to communicate with various systems, such as the engine management system (EMS) transmission controller, steering module air conditioning controls, and many more. It also transmits sensor data like speed sensors and inputs, to control different features of the vehicle. The CAN bus can be used to monitor the status of these different components and can prevent the vehicle from starting if it is in an unsafe condition.

It is important to understand how the CAN bus functions and how it's secured. Using CAN bus could be an excellent way to add new features to your vehicle, but it's essential to safeguard it from threats such as hackers and other. Installing a firewall, and monitoring your CAN-bus with software is the best method to accomplish this.


Ghost2's discrete control unit is hidden inside the car's dashboard or wiring harness, which prevents a thief from physically tampering it. It is also impossible to reset a PIN code or emergency code without having access to the car.

If you must hand over your vehicle for servicing, valet parking, or any other reason, you can use the Transport Mode. This feature disables the Ghost immobiliser's ignition and keyfob functions, and will only be activated when the vehicle reaches 31 mph for 15 minutes.

How to create a PIN code

The Ghost immobiliser protects your car from thieves. The patented technology makes use of the PIN to disable the engine of your vehicle and prevent it from starting if you don't have the correct code, or a valid fob or mobile. Its discreet design ensures that the system is unnoticeable and provides unrivaled security against theft. The system is TASSA-verified and could save you substantial sums on your car insurance.

During the installation, the Ghost system enters a learning mode to record the sequence of buttons that are pressed to create your unique pin code. Once the pin code is created the installer will guide you through the process of activating the system. Once activated the Ghost system shuts down your vehicle's starting motor until you enter a valid PIN or switch the vehicle to transport mode. This makes it extremely difficult for thieves to clone or hack into your vehicle's start system.

It is easy to install an easy-to-install Ghost immobiliser, however, you must follow the detailed instructions in the user's manual to ensure that it is operating properly. Multimeters and hand tools are a good way to check electrical values. Insulation tape and heat shrink tubing may protect exposed wiring and cable ties are essential for keeping everything tidy and secure. Also, be sure to check the system on a regular basis to find any problems and potential errors.

It is important to test the system one more time prior to turning on the ignition. Ghost immobilisers will re-arm themselves after a period of 3 to 30 seconds, depending on the model of your car. The system is also fitted with a Service/Valet mode that lets you temporarily remove the system for servicing or valet parking.

The immobiliser should be concealed in a hidden location beneath the steering wheel or on the dashboard. It is recommended to use a small amount of paint or duct tape to mark the CAN H and CAN L wires so that you can easily identify them during testing. Additionally, the CAN H and L wires should be connected to a power source that has constant 12V. It is also important to check the connections following testing, as a mistake in identifying these wires could cause the system to malfunction.

The system must be activated

A ghost immobiliser blocks your vehicle from starting until you press a series of buttons within the car, usually the steering wheel, door panel or central console. The sequence can be altered by the user at any time. Once the system is activated it is in no way able to be removed by thieves which makes it a great option for anyone who wishes to secure their vehicle from theft.

The device is not designed to be able to be detected by modern diagnostic and code-grabbing techniques. It also doesn't send out radio frequencies, which makes it even difficult for thieves to find the device.

If the device is identified, it will stop the engine from starting and will sound an alarm with a loud sound to scare off thieves. The device can be used to monitor the location of a vehicle, which will aid in the search for the vehicle if it is taken.

Contact Car Specalist Customs for a estimate or to discuss your options in an immobiliser that is ghost-like. We are fully qualified to install a ghost immobiliser for your vehicle, and will make sure that it is tucked away in a remote area. We can also provide additional security measures such as an ignition lock for your wheel and a kill switch to protect your vehicle from thieves.

Disarming the system

If you have an Ghost immobiliser that is fitted to your vehicle, it's vital to know how to disable it. This will aid you in the event that you lock your keys inside the car or your battery fails. The system utilizes an individual PIN code that only you know, and the immobiliser will not be able to start your vehicle without entering this code. Pressing a combination button on the dashboard or steering wheel is the easiest method of entering your code. This is much simpler than using a key fob, and keeps others from copying the remote.

Unlike some aftermarket immobilisers that require cutting wires to install, Ghost2 is non-invasive and is compatible with your vehicle's bus network to function. Its main feature is its ability to bypass the engine without affecting your vehicle's normal functions, making it difficult for thieves to make use of signal boosters or clone your car key. Furthermore, it doesn't emit radio frequencies, which means thieves won't be able to detect it.

The Ghost system also has the Transport Mode, which allows you to temporarily disable the security system in circumstances like transportation or servicing. This feature is ideal when you're lending your vehicle to someone else, without sharing your PIN code, or if your vehicle needs to be kept secure even while you drive it. Press the button five times within 2 seconds to activate the Transport Mode. The Ghost system will confirm activation using 5 signal indicators.

When you're done, remember to save the emergency code in a safe place outside of your vehicle. Then, if you ever encounter a situation where you are locked out of your vehicle, you'll be able to contact the technician or the company who installed the system, and they'll provide you with the code. If you cannot reach them then you can try contacting an authorized dealer however this will require verification procedures and may incur additional charges.

Apart from ghost immobiliser near me www.thekeylab.co.uk of this system, you can rely on it to protect your car against theft and cut down on insurance costs. Many insurance companies offer lower costs or financial incentives for those who install this system to prevent theft.

Edit
Pub: 05 Dec 2024 21:14 UTC
Views: 12