Why Nobody Cares About Double Glazing Seal Repairs
Double Glazing Seal Repairs
When double glazing window seals break this can lead to damp and mould. This could cause damage to the frame and walls surrounding it, as well as impacting your health.
Fortunately, the majority of uPVC windows can be repaired with resealing, rather than replacement. A glazier will typically clean the frame of the window and the glass and apply a fresh layer of sealant, then smooth it.
Water Leaks
Window seals are designed to keep moisture to stay out of your home. However, when they start to wear down, it can cause water leaks around your windows. A window that is leaking is not just a nuisance, but it could cause serious damage to the structure of your home. It is essential to recognize the issue early and get it repaired by a professional before it worsens.
The source of leaking windows can often be found not in the glass but on the frame or sill. A leak in this area is the most typical indication of a failing window seal. It may be caused by damage to the window seal as a result of weather or aging, worn out caulking, or even a blocked drainage section resulting in a build-up of water or ice.
Another sign of a damaged window seal is water appearing in between the panes of your double-glazed windows. While this isn't quite as risky as a leak, since the water doesn't travel far enough to get into your home. It does mean, however, that the inert gases that are encased between your panes have escaped out. This will reduce the insulation value of your window.
Condensation in between the panes is another common indication of a damaged seal. It could be due to the seal being damaged or a damp climate within your home. It could also be a problem with the glass. It's not just a nuisance however, the condensation could result in mildew and mould growth within your home. This can be a challenge and expensive.
If you are seeing these indicators, it's the time to have an examination of your double-glazed windows. Replacing or repairing your windows will help protect your home against water leaks, reduce costs for energy, and also eliminate draughts. It's a small cost to ensure your family's security and comfort. Contact Thompson Creek Window today to discuss your options for a window seal repair or replacement. Our knowledgeable professionals are ready to assist! We offer assistance to homeowners in the Mid-Atlantic.
Condensation
A broken double glazing seal can allow water to get into the insulating gap. This can lead to condensation in the window panes and may also result in fogging or misting.
If you are noticing condensation inside your home, it's time to contact a double glazing repair service. Condensation is a sign that the vacuum seal drawn by the factory has failed and water is leaking into the insulated gap.
Condensation can be caused by a number of reasons, but it is typically the result of gaskets that are not properly fitted and sealants, as well as insulation within the uPVC frame of the windows. As a result, there are a few different double glazing seal repair options, however it is crucial that the seal you choose to replace is correctly designed to ensure the perfect fit and water-tight seal.
Gaskets are typically made of polyurethane, which is a substance that can be used to close gaps between double-glazed units. These are designed to last for a long time but they can perish over time due to wear and tear and exposure to different temperatures and weather conditions throughout the year.
Over time the foam will shrink or crack over time. This could lead to a break in your seal, allowing moisture to get into the double-glazed window. This can lead to condensation and decrease in energy efficiency.
Re-sealing the windows is one option to address this issue. However, this is not 100% guaranteed to fix the issue as it may only eliminate the condensation that has formed and will not address the root problems that are causing the double-glazed windows to leak or form condensation.
A professional who can offer an insurance-backed warranty should replace your windows in full. If the company fails, you are still protected by insurance. It's important to note that the warranty on your replacement windows should be at least 10 years.
Misting
Verify that your double-glazing seals are in good condition as the fall season approaches. Worn-out window seals don't just affect the insulation properties of your windows, but can also lead to condensation, mold and damp. It's important to fix any problems with your double glazed windows as soon as possible to avoid further damage and save money on energy bills.
A typical double-glazed window is made from two glass panes held together by an internal space filled with gas. A layer of sealant on the outside fills in the gap between the uPVC frame and the glass. This is vital to ensure the airtight seal that keeps warm and cold air separated in your home, thereby saving money on your heating bills. Unfortunately, over time, these seals may break down due to ageing and weather conditions, or poor installation. The magic insulation formula which makes double glazed windows so efficient could begin to lose its effectiveness once this happens.
If seals that are damaged or broken are not repaired, they can lead to dampness and condensation that can affect your health as well as the appearance of your window. The dampness and moisture can cause damage to ceilings, walls, floors and other surfaces in your home. They can also produce allergens and irritants that are detrimental to your health and the health of your family members.
The most frequent issue with double glazing is the misting that occurs between the panes. This occurs when moisture gets inside the insulated section of your windows. It can be difficult to fix without professional double-glazing repair.
There are DIY ways to tackle this issue, but we would advise against this because it's not just risky but also very hazardous and damaging to your windows. These methods involve drilling holes into your glazed unit and using chemicals to get rid of fog and condensation. This can cause many problems, most notably exposing your windows to water damage that can ruin the unit altogether.
Professional glaziers possess the knowledge, tools and experience to effectively reseal your uPVC frames and provide you with lasting results. They can also provide advice on how to keep your uPVC window in good condition to avoid future problems.
Draughts
A window that is draughty is a sign that the sealant has probably been damaged and must be repaired or replaced. This will prevent cold air getting into your home, improve energy efficiency and lower heating costs and improve comfort levels and indoor temperature control.
It is important to keep in mind that not all drafts originate from window seals but from the gap between the frame and the bricks. In certain cases it may be possible to fix the issue by simply filling the gap with silicone caulking. If this is not successful it will need to be resealed professionally.
When the sealant around double-glazed windows begins to break down, it allows water ingress. This can result in dampness or even mold. This could have a negative impact on health and may be detrimental to the property. It is important to address any water leaks when you spot them. If your windows are still under guarantee it is worth contacting the company you bought windows from, as they might cover the cost of the repairs.
The windows themselves are usually covered by a warranty which can last a minimum of 10 years However, some businesses offer lifetime warranties - so it is worth taking a look. If your double-glazed windows fall under warranty, it is recommended to contact the company that sold them as fast as you can and let them know about any issues you're experiencing. It is best to contact the company in person or by email and letter. This will ensure that everything is documented and clear.
It is also worth noting that draughts can often be caused by faulty hinges, not a lack of effective seals. The hinges are responsible for closing the window sash (the section that you open) but they can become stiffer as time passes if they're not regularly oiled. This could leave an opening between the frame and the sash which could allow cold air in. This problem can be solved by replacing the hinges, without damaging window seals.