How To Repair Broken Car Key: The Good, The Bad, And The Ugly

How to Repair Broken Car Keys

If your car keys break and you require an immediate solution. You can either wait for the dealer to give you a replacement which is a hassle, or you can find other options to travel, such as using public transport or relying on your friends for rides.

You may try some DIY fixes however, only if have the right tools. You can use penetrating oils and needle-nosed pliers.

Assessing the damage

It's a nightmare to get into your car and discover that your ignition key is damaged. This issue can happen to anyone, and it can be stressful if you're in hurry to get to your destination.

The first thing you need to do is to take your breath deeply and try not to panic. Remaining calm will enable you to make rational decisions and avoid further harm.

Examine the broken key again to determine which parts are still intact, and how much is inside the lock or ignition cylinder. If the broken piece is inside the lock, you can spray a lubricant like WD-40 to loosen it and make it easier to remove. If the damaged part is located in the ignition, you will need to remove it with the special tool called key extractor.

If the key is in the ring, you may try to bend the key back into place by using pliers. This can be a difficult task, particularly if you have a break near a connector. If you cannot get it bent back into position, use a paperclip and pull it straight outward.

If you attempt to force the key in the ignition, it will cause more damage. It may even become impossible to remove. If you are unable to get rid of the broken key, you should call a professional locksmith or visit your local car dealership.

There are a variety of hacks available online that claim to fix damaged car keys, but some of them can actually cause more damage. For instance, attempting to remove a damaged key with a screwdriver may force it into the ignition and even cause damage to the lock. To avoid this, not put anything else in the keyhole besides a special tool specifically designed to remove keys from cars.

Removing the Broken Part

Car keys are fragile and even a small impact or use can cause them break in the ignition. This type of problem can be difficult to fix without the help of a professional locksmith. You could cause further damage by trying to fix the damaged key. Super glue and other methods are not recommended because they can be hard to remove and may cause further damage to the ignition cylinder.

It's also a bad thing to use a magnet to remove the broken key. Magnets can damage electrical components in the ignition cylinder, making it more difficult to remove the broken key. Another common error could result in breaking the key. This is when you apply too much force or perform sudden movements to turn the car key.

If the key's fragment remains visible and exposed, pliers or tongs can be used. If the key isn't visible and stuck in the ignition, a small hacksaw or other thin-profiled tool can be wedged to grasp the edge and then remove it.

Another option is to apply penetrating oil to lubricate the keyhole and reduce friction. If you apply the oil and let it sit for a few minutes, it can help in the removal of the broken key fragment. If the oil doesn't work, you can employ the key extractor to take the broken key fragment from the ignition.

If the key is totally damaged in the ignition the locksmith is required to cut a new one. A professional locksmith will reassemble the other pieces and use them as a model to design an entirely new key that will be as close as possible to the original. This method ensures that the new key will function well and minimizes the possibility of misalignment within the lock or ignition system. This can cause further problems that will require expensive and time-consuming repairs. It is recommended to regularly inspect and replace keys for cars to prevent them from getting damaged or worn to the point of breaking.

Remove the broken blade from the Ignition

If you're lucky enough to still have the key part Don't put it in the ignition or you'll cause more damage. You can use any tools you have at home to remove it with care.

In this scenario, tweezers come in handy. They can grab onto the broken key from a car and help pull it out. Dental picks are tiny pointed tools that work. You can also use a flexible wire coat hanger that fits inside the lock. You may want to consider tapping the metal on a solid surface first, which can sometimes jar a broken key loose.

Another alternative is to use the mini hacksaw blade which is usually available in hardware stores. It is less brittle than a screwdriver, and it can be inserted into the lock to latch onto the damaged car key piece. This could be enough to pull it out without causing damage to the ignition. You may also try needle-nose pliers, which are thin and able to latch on to the broken car key piece. If you are using a tool such as this, ensure that you have acetone or cotton swabs on hand to remove any glue remaining from the tip.

One thing to remember is that using magnets to remove a broken car key isn't a good idea. Magnets aren't made to be used near the ignition, and can cause further damage to the electrical components inside. They also can push the broken pieces of the key deeper into the ignition, making it harder to remove them.

After you've taken the key part out and you're ready to inspect the ignition to see whether there are any visible indications of damage. If you find cracks or bends it is recommended to contact a professional locksmith. They can offer key replacement services that won't damage your car's ignition. They can also give you advice on how to avoid further damage. Keep vehicle key repairs of the damaged car key. This will allow them to comprehend the original shape and create duplicate keys for you.

Finding a New Key

If your car key is damaged there are a few things you can do. The most important thing to keep in mind is to not insert your broken key into the ignition or lock, since this could cause more damage and result in more expensive repairs in the future. It is recommended to contact an expert locksmith for a repair.

If your key plastic top has not broken off completely You can wrap it in clear tape to support it and prevent further breakage. Super glue is another alternative. To do this, wash the broken pieces and apply a tiny dab of super glue to each. After the glue is dry you can attempt to press the pieces back together and hope that your key will work.

You can also call the dealer to request an alternative key. This is a good choice because you will get keys that are matched to your vehicle and is correctly paired with the vehicle. In general it will cost more than using a locksmith service, but it may be the most efficient and most efficient solution to your problem.


A professional locksmith will also provide you with a spare key that will come in handy if you ever have to face an emergency. You can also decrease the chance of your key breaking in the future by taking care of it, by using a key protector, and having a backup plan in case of emergency.

A damaged car key can be extremely frustrating, especially when you try to start your car but find it won't turn over. It is tempting to take matters by yourself but DIY fixes typically fail and lead to misalignments that damage locks and ignition systems. If you push your key into the ignition, it may damage the keyfob battery or cause problems that require costly repairs. It is advised to consult an expert in these circumstances. An experienced automotive locksmith can quickly and easily fix the issue without damaging your vehicle or causing further issues.

Edit Report
Pub: 03 Oct 2024 17:43 UTC
Views: 15