9 Lessons Your Parents Taught You About Fiat 500 Replacement Key Fob

Add a Sparkle to Your Fiat 500 Key Fob

These cute Silicone Covers will add a touch of enjoyment to your Fiat 500 Key fob. These covers are simple to install and snap over your black cover.

The silicone covers guard the car keys from dust, splashes and other contaminates. The covers made of silicone also make your keys appear more attractive. The signals sent by the key remote control are not impeded and can be used even with the cover on.

Make sure your key is protected from dust, splashes and other contaminants.

Add a little flair to your key with this silicone cover. It is perfectly positioned around the key fob without sliding. It shields your key from splashes and dust. The signals that are generated by your key remote will not be affected by the silicone cover, so you can use the buttons on your key fob as normal.


Accessorize your Fiat 500 in Grey or Black with these cool covers. These covers are perfect for those who have their original cover looking a bit damaged, scratched or scratched. The covers are made of premium silicone and come with two key rings, so you can change them when you get bored of one color.

These covers are designed to replace the stock black key cover that came with your vehicle. These covers will not fit if you already have the original key cover.

Looks great

Fiat is a unique and well-known Italian brand, and their cars have an incredible style that sets them apart from the rest of the pack. These sparkling car key covers are an easy and enjoyable method to add a bit of glamour to your keys, without being too overpowering. They look fantastic on your key fob and can truly refresh an old-fashioned one.

The covers are designed to replace the original black cover. They snap into place quickly. It is a good idea to remove the previous cover prior installing the new.

The Fiat logo is printed in both Grey and Black. You can always change it when you want to! They also make excellent gifts for Fiat 500 owners.

Easy to install

Fiat 500 key covers are an easy way to freshen your car keys. They are available in a variety of styles and colors, so you'll be able to find the perfect fit for your personality. The best part is that they're very simple to put in, meaning you can do it yourself within a matter of ten minutes. You will require a screwdriver, as well as some patience. G28 is to remove the cover that was originally installed. This must be removed before the new cover can be installed.

After you have removed your old cover, use a flathead screwdriver in order to pry out the four major attachment clips on the passenger side of the fob assembly. These are marked in red on the image below. Also note the locating tab slots shown in yellow that require disengagement in addition.

Replace the battery with a # CR2032 coin cell battery. The "+" side of the battery should face the fob's opening, and the "-" side should be facing the buttons made of rubber.

Attach the cover for the passenger side mirror by aligning the locating tabs. After you've done this, place the driver side fob back in your car and test it by pressing the button on the front of the car key. If everything is functioning properly, the parking lights should be turned on and the doors will automatically shut.

Easy to remove

Fiat 500 Key Covers are a great way to update your key fob. They're easy to set up and offer a unique look. They protect your key fob from dirt, scratches and smudges. But, before you fit a new key cover you must remove the original cover from your vehicle.

You can do this by pressing the "Fiat" red button on the front face of your key fob. By pressing the button, the lever will be released that allows you slide out the ignition switch made of steel (1). After removing the metal key, you will see the small silver-colored round switch with images of an unlocked and locked padlock next to it. This is the key fob battery switch. The battery is easy to replace by turning the switch a quarter turn with a screwdriver that has a flathead.

The key fob houses an embedded microchip that communicates with the Body Control Module. When you insert your Fiat key it presses a button on the ignition switch that is used to remind you of the "key-inignition". The BCM will then be in a position to read the transponder on the key fob, and verify that it's valid.

You can also add a sport-inspired twin pack to your key covers to give it a an interesting and unique look. The covers snap onto your original cover. They are available in Cream or silver. The key cover can only be used in conjunction with the original black cover is removed from your key fob.

Edit
Pub: 25 Apr 2024 04:01 UTC
Views: 15