15 Gifts For Your Double Glazing Door Lock Repairs Lover In Your Life

Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism broken? Maybe the window or door handles don't meet up properly or are difficult to use.

It is crucial that your double glazed doors work smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith will be able to fix your door lock at a reasonable cost.

Snapped Key

If a key breaks in the lock, it can be extremely annoying. It could also be a security risk in that it can leave you vulnerable to a burglar if the door does not lock. Fortunately, there are quick fixes you can attempt to fix the issue and get your door working correctly.

Remember to remain calm. If you panic you may end up pushing the broken key piece further into the lock.

Spray WD-40, or any other penetrating oil, into the lock. This will assist the broken piece to come out more easily. You can also use a screwdriver to break off any pieces stuck. If you have a chunk of the key stuck out and is not being removed, grab it with a paperclip or other thin metal object and pull it. Both methods work, but be careful not to push the damaged key piece further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these handy, you can use needle-nose pliers that bend to create hooks. Finally, you can use a pair of tweezers grasp and pull out the last bit of the broken keys.

If you cannot remove the broken key piece then you can use a lock deicer. It's available at most hardware stores and is used to freeze any moisture present in the lock.

If none of these solutions work, it may be time to call a locksmith. Fitlocks experts can quickly fix problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure your double glazing door mechanisms to make them easier to operate. You can book a double-glazing repair online or contact us to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose a serious security threat. Luckily, it's an easy repair for a professional locksmith to complete. To fix the cylinder locksmiths must tap it. They can do this using an hammer or another tool, but the most efficient method is to employ a long match or piece of wire. The match or wire end near the keyway. After this, the locksmith will strike the lock and break it open. This is much safer than using a heavy hammer that can damage the lock.

Overheating is the main reason for cylinder heads to crack. This can occur when the cylinder head and block are made from different metals like cast-iron and aluminium. Different metals will be heated and cool at different rates. This can cause localized hotspots to expand quicker than the rest of the cylinder.

Another possible cause of cracks in the cylinder is corrosion. If the cylinder block and head are not maintained in a timely manner they may be corroded or rust, which can cause them to expand more than they would normally. This could lead to cracks over time.


If your uPVC window or door lock is stiff or requires a lot of pressure to turn, this can be caused by several things. This can be caused by a faulty locking mechanism or misalignment or a worn-out handle.

It is a quick and inexpensive fix that most double glazing owners can do. A professional locksmith can usually solve this issue within an hour of arriving at the property. They can repair the locking mechanisms, or replace the window handles and replace the gearboxes, based on your specific needs. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective solution for your home. They can even suggest upgrades to 3 Star security euro cylinders TS007 that provide an extra layer of protection against burglars. This is a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

Window handle locks have intricate mechanisms that wear out with age and use, so it's not a surprise that they can break. If yours fails, it can be difficult to pinpoint the cause of the problem and make sure that you repair it correctly.

If the issue is related to the locking mechanism inside or the latch, fixing your broken handle will improve your uPVC double glazing door's security and help you stop drafts. It can be expensive to replace or repair the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.

With the window open, loosen the screw that secures the handle with the screwdriver. The screw should be located on the inside of the backplate. It is typically concealed by a screw cap for aesthetic reasons. It is important to not be able to replace any internal parts of the handle, such as the plates and levers on either side. Ideally, keep them in the same order so that you can replace them in the event of a need.

Then, with a second screwdriver, loosen the screw that holds the handle to the spindle on the back. Once the screw is free, you can remove the handle and take the broken spindle out. Replace it with a new one, ensuring it's the same length as the previous one (you can usually find these on the internet or at hardware stores) and securely screw it in place. Be careful not to overtighten as this could cause damage to the handle or the window frame.

Check that the new handle is correctly installed Close the window and test the handle. double glazing repairs near me should operate smoothly and you'll be able to open your windows after a few times.

While you're working on the handle, be sure to check your uPVC windows are shut properly. If they don't cause draughts and damp in your home as in addition to compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure that they shut properly.

Broken Spindle

It is quite common that the spindle inside a handle breaks rather than the handle itself. This is most common in uPVC tilt and turn windows. These windows require a handle that acts as an electronic locking mechanism within the window frame. The handle is attached to a rod in the centre that triggers a set of cams that resemble mushrooms, which lock into window frame keeps. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has been damaged This can be an extremely frustrating issue.

There are ways to fix this problem. A good locksmith will be able to quickly and effectively fix this problem. A good locksmith will be able to disassemble the handle of the window by using a tool to take out the wheel portion that houses the spindle. This can be done without causing any damage to the handle or causing other damage to the window frame.

Once the wheel is removed, the technician can examine the spindle to determine what has caused it to break. This involves disassembling the spindle and inspecting every component, observing any damage or excessive wear. This procedure is usually done in a clean room by highly skilled technicians.

The next step is to clean the damaged spindle. This helps eliminate any dirt or debris that might be obstructing its normal operation. After that, the spindle can be repaired or replaced. If it is being replaced the technician could use an identical dowel size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.

If the spindle is damaged and cannot be repaired, it could require replacement. Home centers offer generic replacements. However, if the design of your window is unusual then you will need to find a woodworker or cabinet maker who can duplicate the exact part for you. After the spindle is installed, it can be attached to the handle. Line up the screw holes on the handle to the screws already in the frame. Once the new handle is installed, you are now ready to operate your uPVC window.

Edit

Pub: 10 Feb 2024 11:21 UTC

Views: 29